Acoustooptical Modulator Driver AOMDRV-2
The acoustooptical modulator driver is designed to feed an acoustooptical modulator (AOM) type AOM-80/40-1.5 (or similar) with high frequency voltage with dual amplitude modulation (on, off) binary signal.
-
Description
- The acoustooptical modulator driver is designed to feed an acoustooptical modulator AOM-80/40-1.5 (or similar) with high frequency voltage with dual amplitude modulation (on, off) binary signal and power control.
- High stability of the carrier wave is secured via an integrated master frequency generator with crystal control.
- The driver features an integrated protection from overheating and load mismatch.
- The driver connects to an external regulated DC power supply.
Specification
Acousto-optic modulator driver AOMDRV-2 with output power control
1.
Supply voltage
12 – 16V
2.
Max output power @ 15V supply voltage
12W
3
Supply current @ 15V supply voltage and max output power, max
2.2A
4.
Rated load impedance
50Ω
5.
Carrier frequency
80 Mhz±0.005 %
6.
Discrete modulation signal at the D_MOD input
TTL
7
Carrier suppression at output at zero level of discrete modulation signal, min
54dB
8.
Rise/fall time of output voltage at digital modulation, max
50ns
9.
Delay time of output voltage at digital modulation, max
40ns
10.
Operating signal range at the A-MOD input for analogue modulation
0 – 2V
11.
Output power adjustment range by the A_MOD input control
40dB
12.
Rise/fall time of output voltage at analog modulation, max
160ns
13.
Delay time of output voltage at analog modulation, max
80ns
14.
Operating ambient temperature range
00С to 400С