100W CW Tri-wave 808/1064/532 laser system
A solid state quasi-continuous laser system with 808nm diode pumping of Nd:YAG rod (1064nm) and second harmonic generation based on KTP rod (532nm) and Q-switched modes at both 1064 and 532nm wavelengths. 808nm laser is used for pumping and directly as well.
Cosmetology / Aesthetic Medicine
-
Description
- solid aluminum case
- 808nm diode pumping
- active rods Nd:YAG (1064nm) and KTP (532nm)
- optomechanical wavelength switching inside the module
- continuous and quasicontinuous laser emission
- air or water closed-circuit cooling system
- Peltier elements to ensure selected temperature
- for components of the system
- temperature sensor outputs inside the module
- step motor outputs
- encoders for exact position control of optomechanical components
- optical connection for a 600micron optical fiber or open aperture 5-15mm
Configuration:
- Optical module
- Acoustooptical modulator
- Acoustooptical modulator driver
- Laser diode
- Laser diode driver
- System power supply units
- Controller
- Cooling systemSupply options:
- laser system + RS485/USB master controller + laser diode driver
- laser system only (laser diode power and control, thermal stabilization, wavelength switching is ensured by Customer)
- water or air cooling system
- fiber or optical output connection
- customized designSpecification
Model MDQ-1 MDQ-3 Wavelength 1064 nm 532 nm/808 nm/1064 nm Pumping Type Diode Diode Power 100 W 100 W Modulation type Acousto-optic modulation (AOM) Average power (pulse energy) at 1064 nm, Q-switched 30 W (1 mJ) 30 W (1 mJ) at 532 nm, Q-switched - 10 W (0.7 mJ) at 808 nm, CW - 90 W Repetition rate at 1064 nm, Q-switched 30 kHz 30 kHz at 532 nm, Q-switched - 15 kHz Pulse duration at 1064 nm, Q-switched 30-150 ns 30-150 ns at 532 nm, Q-switched - 30-150 ns at 808 nm, CW - > 1 ms Polarization at 1064 nm, Q-switched Random Random at 532 nm, Q-switched - Linear at 808 nm, CW - Random Parameter Beam divergence < 5 mrad < 5 mrad Typical beam diameter 1-3 mm 1-3 mm Beam diameter at the output of fiber coupled manipulator (option) 1-6 mm 1-6 mm Beam profile at the output of fiber coupled manipulator (option) "Hat-Top" "Hat-Top" Mode Multimode Multimode Cooling requirements Water temperature 15-35° C 15-35° C Inlet pressure 1-4 bar 1-4 bar Water flow 3-10 l/min 3-10 l/min